Archive for the ‘Fun Fly’ Category

Birmingham 2012 Gets Railed!

Wolfie came out of the forest at Birmingham this year to wreak havoc on modelers and give away Rail Blades! Check out the video!

 

Hobbico® 2012 eFest™ Event Coverage Video

E-Fest 2012 was a blast! See you there in 2013!

 

Wagga Wagga Heli Heatwave – Feb 24th – 26th

Really looking forward to visiting Australia next month!

Official Rail Blades Release at IRCHA 2011!!!

 

Wolfie Attacks Smackdown of the South Event!

Another encounter with the ever elusive Wolfie! I think this werewolf has an agenda. I let him fly my prototype Synergy N5c again and things didn’t turn out so well. I will do my best to tame this beast!

 

Synergy N5 with Futaba CGY750

Here is a video from the Orlando Helicopter Blowout. The Synergy N5 FBL with the soon to be released Futaba CGY750 flybarless system. I couldn’t be more happy with the performance of this combination! Thanks to Debian Dog over at Helifreak for the video!

AllMyRC captures Nick Maxwell goofing around with the N5

I swear Nick has 25% more brain matter than the rest of us….. Check out Nick flying the N5 at the Mid America Fun Fly last weekend. Thanks goes out to Zack Hayes of AllMyRC.com for capturing this video.

N5 Owners at Joe Nall

Just a few pictures of some excited new N5 owners at Joe Nall. Happy building Bill and Chad! Kits should be available at other dealers later this coming week.

Synergy N5 Pit Crew at Birmingham Event

These guys helped a tremendous amount at the Birmingham Event. Thanks guys!

 If any of you have not been to the Birmingham event, it’s a great way to kick off the season. The weather was perfect and the people were in good spirits. The ditch definitely got its fair share of helicopter parts this year.

Clintstone’s Birthday Bash Funfly

As usual, Clint’s funfly is a must attend event full of pure fun and nothing but people with love for the hobby. This year was no different from the past years. I arrived on Thursday night and immediately got to work on the prototype E9. I have been battling a problem with the E9 for a while and the next step was looking at flight logs to determine what the problem might be. Clint acquired a Castle Creations ICE160HV for the E9 testing/troubleshooting so we started soldering as soon as I stepped out of the truck. The problem I was having with the model seemed motor/esc related, under very small load, the ESC would shut down like it was experiencing and over amp issue and then recover seconds later. Upon looking at the flight logs, we noticed the motor rpm would increase and amp draw would decrease then the ESC would shut down. Initially we thought the motor was getting saturated due to the weight of the helicopter along with high output ThuderPower 45C packs. After testing all day on Friday with three different motors and two different ESC’s, we knew there was something else going on but couldn’t put a finger on it.

Seeing that the weather was going down hill I decided to take my crippled E9 home and give it a thorough checking. Saturday night Clint called me and told me that Bobby Watts had mentioned to check the auto hub for slipping just in case. I thought to myself… similar to a nitro heli we would probably hear the gear train changing speed if it was slipping but I was willing to try anything at that point. I took the auto hub apart, cleaned the outer steel race thoroughly, reinserted the outer race with loctite just in case it was slipping, and finished reassembling the model. The next day I was quite happy to see that the prototype E9 was again issue free and pulling like a freight train! I learned something new in troubleshooting large electric helicopters, If the motor is allowed to slip even just a little bit during a heavy load, the ESC can lose sync with the motor and completely shut down. Without the Castle Creations ICE160HV logging, it may have taken much longer to figure out what the issues was. Thanks to Castle Creations and everyone else who lent me a hand with the E9 troubleshooting. Applying loctite to the autohub outer sleeve will definitely be part of the conversion kit manual.

Orlando Helicopter Blowout – N5 Pictures Thanks to Caleb Philips!

Even though the weather did not cooperate 100%, I had a great time down at the Orlando Helicopter Blowout. Everything from the non-sponsored 3D Contest to the noon time demos had nothing but pure excitement. Bert Kammerer and Mike Fortin did an exceptional job running this event, you could tell by the look on their face at the end of the day that this event was no easy task to run. Excellent job guys!

Return top
Visitor Map